Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Coil Cleaning: The San Antonio Owner’s Guide
We stock and install Abatement Technologies-compatible coil cleaning parts across San Antonio, with most replacements running between $185 and $420 installed depending on your unit’s size and access. Most owners discover they need us when airflow drops, the system runs longer than it used to, or a musty smell starts coming through the vents. The coil on an Abatement Technologies air purification unit works hard in South Texas, and when it clogs, your indoor air quality takes the hit before the unit ever throws an error code. Call (430) 233-7681 and we’ll match the right part to your model.
Key Takeaways:
- Abatement Technologies coil cleaning parts are not universal. The HEPA and UV-series units use different coil sizes, and a mismatched coil cuts airflow immediately.
- Installed pricing in San Antonio runs $185 to $420 for most residential Abatement Technologies-compatible coil replacements.
- We carry common Abatement Technologies coil parts on the truck and can source odd sizes within 48 hours.
- Every repair includes a written guarantee and the 365-Day Done Right Promise. If the coil replacement fails within a year, we come back at no charge.
Which Abatement Technologies Models This Applies To
Abatement Technologies makes a range of air purification and filtration units, and the coil cleaning parts we handle most often in San Antonio come from their residential and light-commercial portable systems. The compatibility gotcha: a coil from a CAP-series portable air scrubber will not fit a UV-series or a dedicated duct-mounted Abatement unit, even when the housings look similar from the outside. The coil depth, fin spacing, and connector orientation are different, and forcing one into the wrong chassis will bend the fins and choke airflow from day one.
When you call, we’ll ask for the model number printed on the unit’s data plate, usually on the back panel or inside the filter door. If the label is worn off, measure the coil face: most Abatement-compatible coils we install in San Antonio run 12×12, 16×16, or 20×20 inches. OEM Abatement coils are solid but pricey. For many models, a quality aftermarket equivalent with matched fin density and frame thickness cleans just as well and costs 30-40% less. We’ll tell you straight which one makes sense for your unit.
Styles & brands we work with
Signs Your Abatement Technologies Coil Cleaning Is Failing
- Airflow drops noticeably, even on the highest fan setting. A clogged or damaged coil restricts air movement, and the unit has to work harder to push the same volume. If you feel less air at the vent, the coil is often the first place to look.
- A musty or sour smell comes through the vents. Coils trap moisture as they clean the air. When the coil surface gets caked with dust, pollen, and mold spores from San Antonio’s humidity, that moisture sits longer and the smell travels with the airflow.
- The unit runs longer cycles than it used to. A restricted coil means the system has to cycle longer to hit its setpoint. You’ll see it on your electric bill before you feel it in the room.
- You see visible buildup or frost on the coil surface. If you can see a gray or brown mat on the fins, it’s overdue. Frost means the coil is so restricted that condensation is freezing on the surface, even in a warm San Antonio room.
- Water pools near the unit’s base. A failing coil drips condensate where it shouldn’t. That water can damage the unit’s electrical components if it’s not addressed.
Replacement Cost & What’s Included
For Abatement Technologies-compatible coil cleaning and replacement in San Antonio, expect to pay $185 to $420 installed. The range covers the part itself, which varies by coil size and whether you go OEM or quality aftermarket, plus the labor to pull the old coil, clean the housing, and install and test the new one. Units with hard-to-reach coils or models that require more disassembly fall on the higher end.
We put the price in writing before any work begins. No surprise invoices, no bait-and-switch. Every coil replacement comes with our written guarantee and the 365-Day Done Right Promise: if the coil fails within a year, we return and make it right at no charge. That’s not a promotional offer. It’s been our standing commitment since 2004.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: look for visible buildup on the coil, check the filter for blockage, and make sure the unit is getting power. That’s about it. Coil removal on Abatement equipment involves disconnecting the coil from sealed housings, and on some models, the coil sits near electrical connections that you don’t want to touch with a wet coil nearby. We’ve pulled coils out of San Antonio homes where someone tried a DIY clean and bent the fins so badly the coil had to be replaced anyway, which cost more than if they’d called us first.
If you’re not sure whether the coil is truly the problem, call (430) 233-7681. We’ll talk through what you’re seeing before we ever schedule a visit.
FAQs
With regular filter changes and cleaning, most Abatement Technologies coils last 4 to 6 years in San Antonio’s humidity, but units running 12+ hours a day in allergy-heavy seasons often need replacement closer to the 3-year mark. If your unit sits in a home with pets or heavy dust, plan on the shorter end. Call (430) 233-7681 and we’ll give you a straight answer based on what you’re running.
Sometimes yes. If the coil has light surface dust and the fins are intact, a professional cleaning can restore airflow for another year or two. If the fins are bent, corroded, or the coil has been wet long enough to degrade the aluminum, replacement is the honest fix. We’ll tell you which one you need after we look at it, and we won’t sell you a replacement if a cleaning does the job.
Most Abatement Technologies coil replacements in San Antonio take 60 to 90 minutes from start to finish, including removing the old coil, cleaning the housing, installing the new part, and testing airflow and power draw. If your unit requires extra disassembly, it can run longer, and we’ll give you a time estimate before we start.
Yes. We carry common Abatement Technologies-compatible coil sizes on the truck and can source less common sizes within 48 hours. We also work with parts for Lennox, Trane, and Carrier systems. If we don’t have your size in the van, we’ll give you a firm date for when it arrives.
Call Linden Air Duct San Antonio for Abatement Technologies Coil Cleaning
If your Abatement Technologies unit is blowing weak, smelling musty, or running longer than it should, call us at (430) 233-7681. We’ll send a background-checked, photo-badged technician whose name and picture arrive before the visit. You’ll get a written price before any work starts, and every coil repair is covered by a written guarantee. We’ve been doing this in San Antonio since 2004, and Marcus Veale will walk you through exactly what he finds before a single tool comes out. Tell me what you’re seeing, and I’ll tell you whether it’s worth fixing.
Written by Marcus Veale, Owner, Linden Air Duct San Antonio at Linden Air Duct San Antonio, serving San Antonio and nearby areas.